1. Download the right plugin corresponding to your device's CPU architecture.(from the attachments)
CPU help info:
2 .Your Enigma device must already be connected to your local network and have a valid IP (You need find out also the lokal IP Adres of of Enigma device)
Tipp: You can simply use Advance Port Scanner to find out the Enigma Device IP:
3. For Windows User: Open the Powershell (Terminal) with the input cmd in window search
4. Connect to your device with telnet protocol: telnet xxx.xxx.xxx.xxx (replce xxx.xxx.xxx.xxx with your device ip)
5. Login to your Enigma Device with the root credentials:
6. run one of these commands (depends on the CPU architecture)
In my case i use: opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_mipsel.ipk
7. You will see this message after successful installation:
8. Connect your Enigma device to a monitor(TV) and run the plugin and provide the ID (mac address) to your IPTV Provider
If you want remove the Enigma Pugin from your Device, run following command:
CPU help info:
or you simle can search on google: [your enigma device model] cpu architecture for example: vu+ duo 2 cpu architecture"Mips32el" is used for the most boxes. Example VU zero, Vu Duo, Zgemma and mostly above openpli 4 boxes or new images.
"Mipsel" is used for old boxes dm800 clones with old openpli 2.1
"sh4" is used for boxes like spark
"armv7a" is used by new boxes like vu 4k and gigablue sf4008 for other devices please search
2 .Your Enigma device must already be connected to your local network and have a valid IP (You need find out also the lokal IP Adres of of Enigma device)
Tipp: You can simply use Advance Port Scanner to find out the Enigma Device IP:
3. For Windows User: Open the Powershell (Terminal) with the input cmd in window search
4. Connect to your device with telnet protocol: telnet xxx.xxx.xxx.xxx (replce xxx.xxx.xxx.xxx with your device ip)
5. Login to your Enigma Device with the root credentials:
6. run one of these commands (depends on the CPU architecture)
Bash:
opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_armv7a.ipk
opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_mips32el.ipk
opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_mipsel.ipk
opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_oe25_arm.deb
opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_oe25_mips.deb
opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_sh4.ipk
In my case i use: opkg install https://www.worldofiptv.com/downloads/enigma/XtreamTV_0.1.1_mipsel.ipk
7. You will see this message after successful installation:
8. Connect your Enigma device to a monitor(TV) and run the plugin and provide the ID (mac address) to your IPTV Provider
If you want remove the Enigma Pugin from your Device, run following command:
Bash:
opkg remove XtreamTV
Last edited: