WebGrab+Plus is a multi-site incremental xmltv epg grabber. It collects tv-program guide data from selected tvguide sites for your favourite channels.
Windows install instructions:
Step 1 : Get the latest Windows version of WebGrab+Plus (The Program)
Step 2 : Run the insaller
Step 3 : Configure WG++ to your own needs (see the configuration howto)
Step 4 : Run the program. This can be done by the shortcut placed in the startup menu "WebGrab+Plus>WebGrab+Plus".
Remark : Don't change anything in siteini.pack, copy the siteini you want to adjust to siteini.user instead
Remark : For PVR specific examples look at "interact with your PVR software"
Step 1 : Get the latest Windows version of WebGrab+Plus (The Program)
Step 2 : Run the insaller
Step 3 : Configure WG++ to your own needs (see the configuration howto)
Step 4 : Run the program. This can be done by the shortcut placed in the startup menu "WebGrab+Plus>WebGrab+Plus".
Remark : Don't change anything in siteini.pack, copy the siteini you want to adjust to siteini.user instead
Remark : For PVR specific examples look at "interact with your PVR software"
Linux install instructions:
Step 1 : First check if you have mono installed on your linux device. Execute next in a command line window.
If you get output like below, you have mono on your device and can skip installing mono. And go directly to Step 3
If the output is like below, then you have to install mono on your device.
Use Mono version >= 4.8.0 if you have sites with https path. See our faq for details on this.
So the above setup (Mono 2.10.8.1) would not work for certain https sites.
Step 2 : Install mono. Currently mono-complete has too be installed to (reason currently unknown)
See the mono documentation on how to install mono for differnent linux distros. Just be sure to actualy install mono-complete, so use
instead of
that is used on the mono site
Remark: A user has found a reduced setup that makes WG++ work. (instead of the 220MB mono-complete installation, only 32MB is needed. Not tested)
Step 3 : Get the latest Linux version of WebGrab+Plus and save it.
Step 4 : Extract/install the package.
Step 5 : Finish the install
Step 6: Configure WG++ to your own needs (see the configuration howto)
Step 7 : Run the program. Execute next in a command line window.
Remark : Don't change anything in siteini.pack, copy the siteini you want to adjust to siteini.user instead
Remark :
If you get an error like:
Unhandled Exception:
System.IO.FileNotFoundException: Could not load file or assembly 'System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies.
You probably only have mono-runtime installed. Just execute Step 2, and you should be fine.
Remark : For PVR specific examples look at "interact with your PVR software"
Step 1 : First check if you have mono installed on your linux device. Execute next in a command line window.
Bash:
mono -V
If you get output like below, you have mono on your device and can skip installing mono. And go directly to Step 3
Mono JIT compiler version 2.10.8.1 (Debian 2.10.8.1-1ubuntu2.2) Copyright (C) 2002-2011 Novell, Inc, Xamarin, Inc and Contributors. www.mono-project.com TLS: __thread SIGSEGV: altstack Notifications: epoll Architecture: amd64 Disabled: none Misc: softdebug LLVM: supported, not enabled. GC: Included Boehm (with typed GC and Parallel Mark) |
If the output is like below, then you have to install mono on your device.
Bash:
The program 'mono' is currently not installed. You can install it by typing:
sudo apt-get install mono-runtime
Use Mono version >= 4.8.0 if you have sites with https path. See our faq for details on this.
So the above setup (Mono 2.10.8.1) would not work for certain https sites.
Step 2 : Install mono. Currently mono-complete has too be installed to (reason currently unknown)
See the mono documentation on how to install mono for differnent linux distros. Just be sure to actualy install mono-complete, so use
Bash:
sudo apt-get install mono-complete
instead of
PHP:
sudo apt-get install mono-devel
Remark: A user has found a reduced setup that makes WG++ work. (instead of the 220MB mono-complete installation, only 32MB is needed. Not tested)
Bash:
sudo apt-get install mono-runtime libmono-system-data4.0-cil libmono-system-web4.0-cil
Step 3 : Get the latest Linux version of WebGrab+Plus and save it.
Step 4 : Extract/install the package.
Bash:
cd ~
tar -zxvf WebGrabPlus_V2.0.tar.gz
Step 5 : Finish the install
Bash:
cd ~/.wg++
install.sh
Step 6: Configure WG++ to your own needs (see the configuration howto)
Step 7 : Run the program. Execute next in a command line window.
Bash:
~/.wg++/run.sh
Remark : Don't change anything in siteini.pack, copy the siteini you want to adjust to siteini.user instead
Remark :
If you get an error like:
Unhandled Exception:
System.IO.FileNotFoundException: Could not load file or assembly 'System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies.
You probably only have mono-runtime installed. Just execute Step 2, and you should be fine.
Remark : For PVR specific examples look at "interact with your PVR software"
This resource has been reported as working in 0 time(s), and as not-working 0 time(s) this month.
(0 time(s) working and 0 time(s) not-working in total)
(0 time(s) working and 0 time(s) not-working in total)
Last edited by a moderator: