EZ server 12 Full Github

[tapsin]

Free Good install basic and like to me

To view the content, you need to Sign In or Register.

 

[ShinCTL]

Awesome!

Old stuff :/

 

[raza30]

Good post

 

[bambooeric]

Good share

 

[raza302]

good, thanks

 

[mini-pro]

good

 

[sefagenc]

good sharing.. thank you..

 

[didar]

thanks

 

[Tono]

Free Good install basic and like to me

No quote

Nice job bro

 

[markcendic]

which ubuntu need to have?
this is free version or cracked? or none

 

[fedke]

how to set Password?

 

[fedke]

root@ubuntu:~/ezserver# ./setup.sh
/usr/bin/killall
Network Interface:
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 43.254.133.140 netmask 255.255.255.0 broadcast 43.254.133.255
inet6 fe80::baac:6fff:fe7d:7ecc prefixlen 64 scopeid 0x20<link>
ether b8:ac:6f:7d:7e:cc txqueuelen 1000 (Ethernet)
RX packets 2840248 bytes 544550460 (544.5 MB)
RX errors 0 dropped 235061 overruns 0 frame 0
TX packets 115727 bytes 11607307 (11.6 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 198 bytes 17698 (17.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 198 bytes 17698 (17.6 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Current Network Interface is eth0
1. Please select one Network Interface( eth0, venet0:0,...)? eth0
Set Network Interface to eth0
2. Please type new panel port no. (8888): 8888
Set Panel Port No. to 8888
3. Please type new http streaming port no. for players (9999): 9999
Set Streaming HTTP Port No. to 9999
4. Do you want to setup auto_start mode?(y/n) y
auto_start mode is enabled...
5. Setup successfully...
6. Edited by maxdata755 *CRACKED* version...

root@ubuntu:~/ezserver# nohup: appending output to 'nohup.out'


finish??
how to set user and password?

 

[GaiusBaltar]

Tried on Ubuntu 14, 16, 18. working good

 

[fedke]

Tried on Ubuntu 14, 16, 18. working good

how to get password?

 

[GaiusBaltar]

If you set ports as default connect to http://YOURIP:18799/admin/index.htm
user= root
password= go-inside

 

[GaiusBaltar]

Some usefull hints
Dont remove first line on below menus:
- User
- Channel
- Movie
Or you are not able to ADD. Of course you can change first line as you preferr

 

[stbstests]

root@ubuntu:~/ezserver# ./setup.sh
/usr/bin/killall
Network Interface:
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 43.254.133.140 netmask 255.255.255.0 broadcast 43.254.133.255
inet6 fe80::baac:6fff:fe7d:7ecc prefixlen 64 scopeid 0x20<link>
ether b8:ac:6f:7d:7e:cc txqueuelen 1000 (Ethernet)
RX packets 2840248 bytes 544550460 (544.5 MB)
RX errors 0 dropped 235061 overruns 0 frame 0
TX packets 115727 bytes 11607307 (11.6 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 198 bytes 17698 (17.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 198 bytes 17698 (17.6 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Current Network Interface is eth0
1. Please select one Network Interface( eth0, venet0:0,...)? eth0
Set Network Interface to eth0
2. Please type new panel port no. (8888): 8888
Set Panel Port No. to 8888
3. Please type new http streaming port no. for players (9999): 9999
Set Streaming HTTP Port No. to 9999
4. Do you want to setup auto_start mode?(y/n) y
auto_start mode is enabled...
5. Setup successfully...
6. Edited by maxdata755 *CRACKED* version...

root@ubuntu:~/ezserver# nohup: appending output to 'nohup.out'


finish??
how to set user and password?
[/QUDefault password is

which ubuntu need to have?
this is free version or cracked? or none

Cracked Version..

 

[stbstests]

Password is pre-set (go-inside), you change it after installation on the web interface.

 

[stbstests]

Have tested it and noted it works best when you have UDP multicast inputs, not all m3u inputs work. Also note version it does not have transcoding feature.

 

[markcendic]

curently I am installing on ubuntu 18 and I have lot of bugs..
maybe ubuntu 14?